Industrial
Factory Information/Monitoring system based on an Atmel ARM processor.Board contained two RS485 interfaces, CAN BUS and four channels of digital I/O. (Not all features were installed on this board)
SD card contained databases and webpages. The board executed FreeRTOS.
Medical
This ARM-based design was an early prototype of a hand-held device to receive signals from an implantable cardiac monitoring device and then relay the data via a Bluetooth link to a remote service for monitoring.
Medical
MSP430 based system with MICS-band Radio and two differential channels of ECG. Device was part of an implantable cardiac monitoring system.
Industrial
Boost converter to drive 36 LEDS at constant current from a 12 to 24 VDC source. Used as a blinking light visible from both sides for an industrial application. (Half the LEDS are on the back side)
Medical
This is the primary circuit board for a device that measures a person's bio-impedence and then computes their body composition.
Consumer
Quilting Machine Operator Panel.
A quilting machine is essentially a heavy-duty sewing machine on a carriage that can move in both the X and Y directions.
The operator can sew the material and the stitch pattern on the fabric and is able to select the speed, or on some models the desired stitches per inch.